Skip to content

FAQ

Got a question? Chances are someone has asked it before. We’ve gathered the most common questions and answers in this FAQ.

Mounting

Compatibillity with poles, prisms, etc.

What is the total height of the SiteStamp?

Total height, without stencil is 237mm. Adjust this using the software, or adjust your telescopic pole.

Does it fit my Leica GLS11 / GLS12 pole?

There is a workaround, as the GLS11 and GLS12 does not have a 5/8″ thread. To be able to use the SiteStamp anyway, mount the GRZ122 prism with a 5/8″ thread onto the SiteStamp. Then place the GLS11/ GLS12 pole upside down on the prism. Ready to go.

Does it fit with Leica 360 reflector?

Yes, you can fit the Leica MPR122 reflector directly onto the Sitestamp.

What if my pole has 5/8" female thread

Attach SiteStamp using a 5/8″ male adapter. This is not included with the SiteStamp.

Can I use SiteStamp with my current pole?

Yes, as long as it has 5/8” thread. Unscrew the tip, screw on SiteStamp, and you’re ready for doing stakeout.

Stencils

Which type of stencil should I choose?

That depends very much on the situation and the application. Generally speaking, the recommendation is to use 1 mm for construction applications and 2 mm for roadworks.

What is the differences between 'Flat' and 'Rough' stencils?

Due to their shape, ‘Rough’ stencils are better suited to uneven surfaces and prevent the paint from seeping underneath the stencil. The starter kit contains both ‘Flat’ and ‘Rough’ stencils, so you can try out which one works best for you.

How do I replace the stencil?

You can simply click the stencil into place at the bottom of the SiteStamp.
If you want to replace it, there’s a handy tab on the stencil. Step on this tab with your foot, pull the SiteStamp upwards, and the stencil will click loose by itself. No more paint on your hands.

How long can you use a stencil before you need to replace or clean it?

Depending on the application, this is the feedback we receive:
Precision applications, where the marking must remain neat and clean: clean after 5–10 dots.
Less critical applications: up to 40 dots.

In many cases, simply removing the excess paint with a stirring stick is sufficient to carry on.

Why is the template shaped like a Mercedes logo, rather than four lines?

Our tests have shown that the ‘Mercede’ logo has a longer lifespan.
The fewer lines, the better, due to paint build-up on the stencil.
This is the minimum number of lines required to clearly point towards the centre.

Does SiteStamp work even without the stencil?

Yes, you simply mark a round dot.
SiteStamp is already being used in this way, for example, to mark out pile positions and stakes on festival sites.

Markingspray

Everyting about can types and paints.

Does SiteStamp work with my own type of paint as well?

SiteStamp is a universal marking tool, develloped to be able to work with various types of paints. Using your own paint requires some small adjustments or sometime replace a part. Those parts you can easily slide-on. We are constantly working to make SiteStamp compatible with more types of paint. Various suppliers and surveyors from around the world send us spray cans so that we can test them.

Soppec has been our favourite right from the start.
Other brands that have been tested include:

  • Hercules,
  • 4Tecx
  • Berner.

We are currently testing the following:

  • Dy-Mark,
  • COSMOS LAC
  • Rustoleum.

If your paint isn’t listed, please send us a message so that we can arrange a test.

Further information on adjusting SiteStamp for different types of spray cans will follow on this website.

What is the best type of spray to use?

For now we’ve got the most experience with Soppec Fluo TP. But Pro Mark might also be a good solution. In terms of stencil lasting, some colors give better results than others. This is because the amount of powder in the paint differs a bit between several colors.

On site

Do I need a wind shield?

It depends on your location. We got back from our users that above 3-4 bft the spray is blown away before it reaches the ground. Sometime you can block the wind by using your feet and legs. If that doesn’t work, the wind deflector comes in handy.

I already have a SiteStamp, will a windscreen fit on it?

Yes, you can order a separate windscreen kit for this, including fastening materials.

How many points can you mark in one day?

With SiteStamp, you work faster, but above all, with less effort. How much faster depends on the project, walking distances and the way you work.

Reference material coming soon.

Cleaning

How do I clean my SiteStamp?

The best way is to let the paint dry, and then scrape it off.
It may help to spray the SiteStamp with something greasy beforehand.

Orders & Shipment

To which countries do you ship?

We currently ship to all countries within the EU.

Shipping outside the EU coming soon.
Please send us an email.

Hoeveel bedragen de verzendkosten?

Shipping costs are automatically calculated in the webshop, based on your country and order.

Can't find your question?

Get in touch, we're happy to help.